lundi 25 avril 2011

Cube LED, 3D Dot Matrix, 3x3x3 LED Cube

Horizontally and vertically arranged LED display pictures and various characters, the device is called Dot Matrix.


Cube LED Dot Matrix such a stereoscopic display device representing overlapping layers that can be.

Evaluate the size of 4x4x4 Cube LED is made​​.





First, I got the LED between the aspect 1cm long, the length of the diagonal leg of the LED soldering in air bending

So to be instantly secure the device at regular intervals is required.

That is all I could think ppangpan. Ppangpan gumeonggan interval of 2.54mm is placed over four fields of the distance is about 1cm.
Source: Cube LED? 3D Dot Matrix?



Nanhu 4 per horizontal line between the solder on the existing work on the floor was laid.

The LED cathode (-) parts in common, as shown above, jump down.



LED of the A-node (+) based on a portion of the horizontal line descends to the bottom of ten thousand. By itself, the size of two 4x4



4x4 Dot Matrix Module 4 of the size should be created.


4x4x4 LED so that the total goes to 64. Completed 4 modules and one frame after coming to look on the substrate.



A different angle



Photos also another angle.

We have made an LED portion is expected to create a control circuit.

But when it stops, is pending .. .

Atmega32 be made ​​using the shape and concept are displayed.

Google, obtained from the schematic is shown below.




Aucun commentaire:

Enregistrer un commentaire